Sony Bravia Supervisor Install

Sony Bravia Supervisor Install

Configurations under BRAVIA Pro Settings

home menu, go to settings > system 

Go to settings > System > Power

set power saving, Idle TV standby, Auto shut-off to Off

Under settings enable developer options and ADB.

Settings> System > About> Build
• Press ‘OK’ button 7 times in build option - developer mode will be unlocked 

Go to Settings > System > Developer mode and enable “ADB debugging” and “stay awake” option 


Enable IP Control under settings.

Settings > Network & Internet and home network settings (maybe labelled LOCAL SETTINGS)

Go to IP Control, set the authentication to None and enable Simple IP Control 

Installation of apks.

Settings and select the first option “pro settings” 

Allow WebAppRunTime to access photos, media and files when the pop-up appears

Insert your USB drive with the BRAVIA Supervisor app and updater apk available on it (must be in the root of your USB stick to be detected)
“Install APK” option in the BRAVIA pro setting menu will appear 

BRAVIA Supervisor BRAVIA Supervisor updater (Currently NO UPDATER)

Select the BRAVIA Supervisor app and install 

Privacy permissions to BRAVIA Supervisor app.

Settings > privacy > special app access > display over the apps and allow BRAVIA Supervisor app and BRAVIA Supervisor updater (Currently NO UPDATER)

Pro settings configuration. 

Pro Settings - Start-up Services - Activate “Remote firmware update Service” (useful for BRAVIA Supervisor firmware upgrade management for example) 

When activating “remote firmware update service” an automatic message appears to make the installation of the app, follow the installation points and reboot the device. 

Pro Settings - Start-up Services - Activate “BRAVIA Web UI” (useful for the management of the BRAVIA pro settings remotely) 

Define the password by default under “Admin password” a password for the BRAVIA Web UI 

Pro Settings - Admin Password - access, password to add by default is sony1234 

Go to Home Settings > Pro Settings > apps and enable the BRAVIA Supervisor App and updater (also make sure Pro Settings Tools and app are enabled)

Pro settings - NTP server - time.apple.com - pro mode need to be enabled to take the NTP configuration into account. 

If not connected to internet setup in Settings - Network and Internet 

Switch to Po Mode and open Supervisor app - should see QR code and activation code